The heart of the drive unit is an electric lift cylinder with a lifting force of 25,000 N. Installation depths of 170 mm can be achieved thanks to the small installation height.
The system, which was developed in house, can be controlled using the touch panel or using the conventional RJ45 control.
Thanks to the high travel speed, the system can be adjusted from 0 – 800 mm within just 30 seconds.
Sliding bearing technology
Wear-free and maintenance-free guide rails thanks to state-of-the-art sliding bearing technology.
Aluminium profile rails
Two aluminium profile rails with latching holes arranged parallel to one another guarantee that the system locks into place securely and operates almost silently.
Positioning via incremental encoder. Positioning heights can be set individually based on customer specifications.
Maximum safety thanks to monitoring of all moving parts and safety shut-off devices.
Platform surface of your choice and in any style you like.
Height adjustment via electric lift cylinder with a lifting force of 25,000 N. The hall floor can be adjusted from 0 – 800 mm within 30 seconds. The low design height of the lift cylinder enables an installation height of 170 mm.
Positioning heights can be set individually based on customer specifications. Wear-free and maintenance-free guide rails thanks to state-of-the-art sliding bearing technology.
Maximum safety when moving the system into position thanks to monitoring of all locks and supports using a controller that was developed in house.
2 m x 1 m
Special size possible
Backing plate thickness
From 14 mm
170 - 200 mm
Horizontal test load
1/10 of the vertical test load
Vertical test load
8.5 kN/m2 (867 kg/m2)
Horizontal traffic load
1/10 of the vertical traffic load
Vertical traffic load
5.0 kN/m2 (510 kg/m2)
Max. stage height
83.3 cm above the hall floor
DIN 13814, 4112, 1055, 15921
Are you interested in our platforms? Send us a brief enquiry and you’ll receive a perfectly tailored selection of products directly from 2M.
Every 2M stage platform from the ERGO series is manufactured in our certified production facility in Ratingen and tested by the TÜV in accordance with the latest standards and directives.